RG-AP110-L
- Tốc độ lên đến 300Mbps@2.4GHz chuẩn 802.11 b/n/g .
- Dòng sản phẩm phù hợp sử dụng cho khách sạn, văn phòng, căn hộ.
- 1 cổng 10/100M Ethernet LAN, 1 cổng 10/100M Uplink
- Hỗ trợ nguồn 802.3af PoE <5W
- Hỗ trợ dịch vụ Ruijie Cloud miễn phí giúp cấu hình tư xa cực kỳ đơn giản.
- Hỗ trợ tối đa 32 người dùng | 8 BSSID
- Hỗ trợ tính năng cân bằng tải thông minh dựa vào số lượng người dùng và lưu lượng.
- Thiết kế phù hợp với kích thước ổ cắm chuẩn 86-type
- Hỗ trợ các tính năng WIFI marketing:
Đặc tính sản phẩm
RG-AP110-L được thiết kế để triển khai không dây trong các khách sạn, văn phòng, tòa nhà dân cư và các thiết lập như nhau. AP treo tường có cùng kích thước với một tấm mặt 86 loại tiêu chuẩn với cổng Ethernet và giọng nói tích hợp. Với thiết kế ngắn gọn và triển khai dễ dàng, AP cho phép không bị gián đoạn đối với các hoàn thiện bên trong và cung cấp giải pháp tốt nhất cho các kịch bản với thiết kế nội thất tinh tế.

Exquisite
Wall AP Design

Guarantee for Performance

85mm Design
Easy for Installation

Universal Compatibility
Compatible for US/EU Junction Box

Big Data Optimization Algorithm
Ensure the Smooth Network Experience

High Penetrating Power


PoE Power Supply
Supply Power to Wall AP Via Network Cable

Thông số kỹ thuật
Model |
RG-AP130(L) |
RG-AP110-L |
||
Target Deployments |
For wireless deployment in hotels, offices, residential buildings |
|||
Basic Specifications |
Radio |
Concurrent dual-radio dual-band |
Single band |
|
Protocol |
802.11a/b/g/n/ac |
802.11b/g/n |
||
Operating Bands |
2.4GHz and 5GHz |
2.4GHz |
||
Antenna |
Built-in omnidirectional antenna (Base gain 3.5dBi) 2×2 MIMO |
Built-in omnidirectional antenna |
||
Max Throughput |
1.167Gbps |
300Mbps |
||
Spatial Streams |
2 |
2 |
||
IP Rating |
IP41 |
|||
Ports |
Service Port |
Front: 4 10/100M Ethernet ports Side: 1 RJ-45 pass-through port (RJ-11 combo) Rear: 1 10/100/1000M uplink port 1 RJ-45 pass-through port (RJ-11 combo) |
Front: 1 10/100M Ethernet LAN ports Rear: 1 10/100M Uplink port Supports 802.3af PoE
|
|
Power |
Power Supply |
PoE (802.3af) |
||
Power Consumption |
<8W |
<5W |
||
WLAN |
Maximum clients per AP |
32 |
||
BSSID capacity |
16 |
8 |
||
SSID hiding |
Support |
|||
Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID |
Support |
|||
Remote Intelligent Perception Technology (RIPT) |
Support |
|||
Intelligent load balancing based on the number of users or traffic |
Support |
|||
STA control |
SSID/radio-based |
|||
Bandwidth control |
STA/SSID/AP-based speed control |
|||
Band Steering (5G Priority) |
Support |
N/A |
||
Dynamic Frequency Selection(DFS) |
Future release support |
|||
Security |
PSK authentication |
Support |
||
Web portal authentication (by Ruijie Cloud integration) |
Support |
Support (Ruijie EG Security Gateway Required) |
||
802.1x authentication |
Support |
NA |
||
Data encryption |
WPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
|||
PEAP authentication |
Support |
|||
Data frame filtering |
Whitelist, static/dynamic blacklist |
|||
User isolation |
Support |
|||
Rogue AP detection and countermeasure |
Support |
|||
Standard & Extended IP & MAC ACL |
Support |
|||
RADIUS |
Support |
NA |
||
CPU Protection Policy (CPP) |
Support |
NA |
||
Wireless Intrusion Detection System(WIDS) |
Support |
|||
IPv4 address |
Static IP address or DHCP reservation |
|||
Management and Maintenance |
Network management |
SNMP v1/v2C/v3, Telnet, TFTP, FTP and Web management |
||
Fault detection and alarm |
Support |
|||
Cloud AC management |
Support |
|||
Statistics and logs |
Support |
|||
External Characteristics |
Lock |
Standard: Anti-theft screws and ordinary screws |
N/A |
|
LED Indicators |
1 LED status indicator |
1 LED status indicator |
||
Relevant Standard |
Wi-Fi Alliance Certification |
Support |
||
Safety Standard |
GB4943, EN/IEC 60950-1 |
|||
EMC Standard |
GB9254, EN301 489 |
|||
Health Standard |
EN 62311 |
|||
Radio Standard |
EN300 328, EN301 893 |
|||
Vibration Standard |
IEC60068-2-31, ETSI EN300 019, NEBS GR-63-CORE |
|||
Specifications |
Dimensions (W x D x H) (mm) |
116 × 86 × 42 |
86 x 85 x 34 |
|
Weight |
0.23kg |
0.1KG |
||
Work Environment |
Temperature |
Operating Temperature: -10°C to 45°C |
Operating Temperature: 0°C to 40°C |
|
Storage Temperature: -40°C to 70°C |
||||
Humidity |
Operating Humidity: 10% to 95% (non-condensing) |
Operating Humidity: 5% to 95% (non-condensing) |
||
Storage Humidity: 5% to 95% (non-condensing) |
||||
Installation Mode |
Standard 86-type faceplate installation |
Compatible with UK/US/EU Junction box *Universal Mount Kit need to purchase separately for US/EU junction box |