(028) 39812099 info@ruijie.vn
Banner Product


Thiết bị Access point wifi ngoài trời. Wi-Fi 6 (802.11ax)
- Tốc độ lên đến 1.775Gbps (575Mbps@2.4G & 1.2Gbps@5G)
- Anten đẳng hướng (Góc ngang 60°, góc dọc 30°)
- Hỗ trợ 2 băng tần:
+ 802.11b/g/n/ac/ax :2.4G ~ 2.4835GHz
+ 802.11a/n/ac/ax : 5G:5.150~5.350GHz, 5.725~5.850GHz
- Dòng sản phẩm phù hợp sử dụng cho khu vực rộng lớn như sân bãi, bến cảng, .... độ phủ sóng khu vực có đường kính 250m
- 1 cổng combo PoE+ 10/100/1000BASE-T / SFP | Nguồn 802.3af PoE <12.95W
- Hỗ trợ dịch vụ Ruijie Cloud miễn phí giúp cấu hình tư xa cực kỳ đơn giản.
- Hỗ trợ tối đa 1024 người dùng | 32 SSID
- Hỗ trợ tính năng cân bằng tải thông minh dựa vào số lượng người dùng và lưu lượng.
- Hỗ trợ tính năng PPSK giúp phân quyền đăng ký wifi cho 1 số thiết bị xác định trước.
- Hỗ trợ các tính năng WIFI marketing:

Đặc tính sản phẩm

Wi-Fi 6 (802.11ax) Technology

● 1024-QAM High-speed Access Rate

RG-AP680(CD) adopts the dual-band dual-radio 802.11ax design with up to 4 spatial streams and built-in directional antenna. The first radio offers up to 0.575Gbps access rate at 2.4G and supports switching to 5G with up to 1.2Gbps access rate, while the second radio offers up to 1.2Gbps access rate at 5G. The AP offers a maximum wireless access rate of 2.4Gbps. 2.4G + 5G is recommended, which offers access rate of 1.775Gbps.

● OFDMA High-density User Access

RG-AP680(CD) supports OFDMA of 802.11ax, which divides the WLAN channel into multiple narrower subchannels, with each user occupying one or more subchannels. By scheduling multiple users to receive and send packets concurrently via the AP, user competition and back-off can be reduced, thereby reducing network latency and improving network efficiency.

● Spatial Reuse with BSS Color

RG-AP680(CD) supports spatial reuse with basic service set (BSS) color of 802.11ax to identify the BSSs of different WLANs in the network by different coloring (BSS color), and further divide them into internal (BSS which belongs to the device) and external BSS. Different packet receiving and sending thresholds can be maintained. When receiving packets, BSS coloring is used to quickly identify the packet of external BSS. If the signal strength is lower than the receiving threshold of external BSS, the packet will be ignored. The transmission of the internal BSS packets will be not affected.

This technology can implement channel reuse in a high-density scenario, greatly reducing the impact of co-channel interference for the actual network deployment.

● Industry-leading Local Forwarding Technology

Employing Ruijie’s intelligent local forwarding technology, RG-AP680(CD) eliminates the traffic bottleneck of wireless access controllers. Deploying with the Ruijie RG-WS Wireless Controller Series, users can flexibly configure the data forwarding mode for RG-AP680(CD). The AP also controls whether the data will be forwarded via the wireless controller according to the SSID or user VLAN, or directly sent to the wired network for data exchange.

The local forwarding technology can classify and forward delay-sensitive data which requires real-time transmission through the wired network to greatly alleviate the traffic pressure on the wireless controllers and better meet the high traffic transmission requirements of the 802.11n and 802.11ac network.

● Abundant QoS Policies

RG-AP680(CD) supports a wide variety of QoS policies. For example, it provides WLAN/AP/STA-based bandwidth limitations which prioritize important and critical data transmission over others for bandwidth guarantee.

With the multicast-to-unicast technology, RG-AP680(CD) resolves the video lagging problem due to packet loss or high latency in the wireless network, and highly enhances user experience of the multicast video services of wireless networks.

Wi-Fi 6 Equipment For All Scenarios:

Always One Option Fit For You

Ruijie is one of the leading enterprise networking suppliers worldwide and committed to providing the best Wi-Fi experience to our stakeholders. We are the first supplier to provide full-scenario Wi-Fi 6 access point solution in the market, ranging from indoor, wall plate to outdoor access points, guaranteeing perfect wireless experience in various situations.

For details, please visit https://www.ruijienetworks.com/products/wireless-wifi6

Easy Installation & Deployment

● Easy-to-use Mount-Kit

An adjustable mount-kit is available by default for painless deployment optimization. The APs can be easily adjustable (total in 60°) to adapt to various scenarios.

Adjustable Mount-kit of AP680 Outdoor Access Point

● Flexible Gigabit Uplink Options

The RG-AP680(CD) outdoor access point offers a 10/100/1000Base-T Ethernet uplink port that rids the LAN port of being the wireless access bottleneck, and a 1000M SFP port that adapts to wired networking structure under different user scenarios. The SFP Base-X port takes up the data transmission workload for optimal network deployment.

Comprehensive Security Policies

● User Data Encryption

RG-AP680(CD) offers comprehensive data security protection with encryption technologies such as WEP, TKIP and AES, guaranteeing the data transmission security of the wireless network.

● RF Security

In collaboration with Ruijie’s RG-SNC Smart Network Commander and RG-WS Wireless Controllers, RG-AP680(CD) enables the RF probe scanning mechanism to detect unauthorized access points or other RF interference sources. Once detected, the AP will alert the network administrator to monitor potential threats and usage status in the wireless environment.

● ARP Spoofing Protection

The ARP detection feature effectively suppresses the phenomenon of ARP gateway spoofing and ARP host spoofing in the network, and ensures the normal Internet access of users. Automatic binding can be achieved for both dynamic and static IP allocation, which greatly reduces labor costs and management costs. The ARP rate limit feature allows you to limit the rate of ARP packets to prevent the malicious use of scanning tools to perform ARP flooding which occupies the network bandwidth and causes network congestion attack.

● Multiple Easy-to-use Authentication Modes

With Ruijie Cloud Service or RG-MACC Software controller, the RG-AP680(CD) outdoor access point supports a wide range of authentication methods such as Guest Hotspot, 802.1x, voucher/ access code, user account, and social authentication. Complying with the standard network access control, it offers a set of control policies in terms of user access, authorization, equipment compliance check, network behavior monitoring, network attack prevention, etc. All these control features guarantee high network security for authenticated users. 

Multi authentication options for guests and employees

High Availability Design

● Authentication Offload and Acceleration

Powered by Ruijie Cloud and EasyGate (EG) security gateway, captive portal and account & voucher authentication can be managed by Cloud, but all security policy and enforcement will be processed locally at EG security gateway. It not only accelerates the overall authentication processing, and also provide additional service availability protection in case of Cloud or WLAN Controller is unreachable, all authentication service still un-interrupted.

Ruijie EG’s Authentication Offload and Acceleration

● Remote Intelligent Perception Technology (RIPT)

In the traditional network architecture where FIT APs are centrally managed by a wireless controller, packets received by the AP must be transmitted to the controller before being forwarded. When the wireless controller becomes faulty, the APs will fail to work properly causing whole network breakdown.

RIPT Disaster Recovery

Ruijie’s latest RIPT provides you a complete disaster recovery solution and enables the Wireless Controller Series to implement intelligent link perception. Once the faulty controller is detected, the APs will quickly switch to the intelligent mode to continue data forwarding, ensuring the high availability of the wireless network and keeping wireless users always online.

Hybrid Management

All Ruijie enterprise APs support hybrid management mode. Either deployed as standalone AP (Fat mode) or managed AP (Fit and MACC mode), the AP will detect the operation mode automatically without extra effort on firmware upgrade. For additional security and operation, we recommend the enterprise customers to choose either one of below wireless controller options depending on the functionality and capacity:

Below are the summarized feature highlights for various Ruijie management system options which target for specific industry segments:

*new feature to be available in year 2020

**Ruijie EG Gateway required

Bluetooth Serial Port for Easy Maintenance

RG-AP680 (CD) supports switching between Bluetooth serial port and iBeacon. If the default configuration is Bluetooth serial port, when equipment failure occurs, the administrator can manage the device via the mobile phone without requiring to climb up the pole to reach the device.

Mobile Monitoring and Optimizing

Ruijie is committed to providing more simple networking experience for customers by launching a free mobile app  (namely Ruijie Cloud) for unified device lifecycle managmeent, which is not only for Ruijie access points, but also for switches and security gateways, from provisioning, monitoring, configurations to optimization. For details, please visit our official website at https://www.ruijienetworks.com/products/smb/cloud-service/cloud-service/ruijie-cloud-solution/mobile-app

Warranty Information

The Ruijie RG-AP680(CD) Outdoor Access Point come with 3 year warranty. For more details, please visit https://www.ruijienetworks.com/support/servicepolicy.

Antenna Patterns

● Horizontal planes (top view)

Below are the RG-AP680(CD) 2.4GHz and 5GHz azimuth antenna patterns:

RG-AP680(CD) 2.4GHz (Left) and 5GHz (Right) Azimuth Antenna Patterns

● Vertical (elevation) planes (side view, AP facing down)

Below are the RG-AP680(CD) 2.4GHz and 5GHz elevation antenna patterns:

RG-AP680(CD) 2.4GHz (Left) and 5GHz (Right) Elevation Antenna Patterns

Thông số kỹ thuật

Hardware Specifications

Hardware Specifications




Dual-radio dual-band


Concurrent 802.11ax and 802.11a/b/g/n/ac

BLE 5.0

Operating Bands

802.11b/g/n/ac/ax :2.4G ~ 2.4835GHz

802.11a/n/ac/ax : 5G:5.150~5.350GHz, 5.725~5.850GHz

 (Note: the operating bands varies according to different countries)


Built-in directional antenna

Antenna Loba Orientation

Internal Directional:

60 degrees total

Antenna Gain


Spatial Streams

4 spatial streams, MU-MIMO

Max Throughput

Up to 0.575Gbps@2.4G

Up to 1.2Gbps@5G
Up to 2.4Gbps per AP

2.4G+5G is recommended with 1.775Gbps access rate



DSSS:DBPSK@1Mbps,DQPSK@2Mbps,and CCK@5.5/11Mbps



DSSS:DBPSK@1Mbps,DQPSK@2Mbps,and CCK@5.5/11Mbps


Receiver Sensitivity




11ac HT20:-83dBm(MCS0), -57dBm(MCS9)

11ac HT40:-79dBm(MCS0), -57dBm(MCS9)

11ac HT80:-76dBm(MCS0), -51dBm(MCS9)

11ax HT80:-76dBm(MCS0), -49dBm(MCS11)

Maximum Transmit Power


(Note: The actual transmit power varies according to different countries and regions)

Adjustable Power



251mm × 168mm × 64mm (without mounting bracket)



Service Ports

1 10/100/1000Base-T Ethernet uplink port(PoE)

1 SFP port

Management Port

1 console port


Support switching between Bluetooth serial port and iBeacon

Power Supply

Support PoE (802.3af / 802.3at)

Support 44 ~ 57V DC power supply

Power Consumption


Operating Environment

Operating Temperature: -40~65℃

Storage Temperature: -40~85℃

Operating Humidity: 0% to 100% (non-condensing)

Storage Humidity: 0% to 100% (non-condensing)

Installation Mode

Wall/pole-mount installation

IP Rating


Surge Protection

Common mode +/-9kV

Safety Standard

GB4943, EN/IEC 60950-1

EMC Standard

GB9254, EN301 489

Radio Standard

SRRC, EN300 328, EN301 893

Software Features


Maximum clients per AP


SSID capacity

Up to 32

SSID hiding


Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID


Remote Intelligent Perception Technology (RIPT)


Smart device recognition


Intelligent load balancing based on the number of users or traffic


STA control


Bandwidth control

STA/SSID/AP-based speed control


PSK and web authentication


Data encryption

WPA (TKIP), WPA-PSK, WPA2 (AES), WEP (64 / 128-bit)

WeChat authentication


QR code authentication


SMS authentication


PEAP authentication


Data frame filtering

Whitelist, static/dynamic blacklist

User isolation


Rogue AP detection and countermeasure


Dynamic ACL assignment




CPU Protection Policy (CPP)


Network Foundation Protection Policy (NFPP)



IPv4 address

Static IP address or DHCP

IPv6 address

IPv6 terminal access authentication, ICMPv6

Management and Maintenance

Supported wireless LAN controllers

Ruijie WS Series Wireless Controller

Ruijie MACC-Base Software Controller

Ruijie Cloud (Public Cloud)

Management protocol

Telnet, SSH, TFTP, Web

Wireless Intelligent AI Optimization Service (WIS)




Syslog / Debug



FAT/FIT/MACC mode switching

Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management

Hướng dẫn sử dụng


Trụ sở chính

872-872A Tạ Quang Bửu, P. 5,
Quận 8, Tp. Hồ Chí Minh

Tel: (028) 3981 2099
(K.Doanh: bấm số 1; Kế toán 2; Kỹ thuật 3; Bảo hành 4; Giao hàng 5)
Đăng ký đại lý: (028) 3981 2099  (line nội bộ 208 Chị Yến, line nội bộ 212 Ms. Thiệp)


Đại diện thương mại các tỉnh phía Bắc
4B Bạch Đằng, P. Hạ Lý, Q. Hồng Bàng,
Tp. Hải Phòng
Tel: (0225) 664 6113
Mobile: 0904 330 461 (Mr. Hà)

Đại diện thương mại tại Hà Nội
25 Lương Thế Vinh, Quận Thanh Xuân,
Tp. Hà Nội
Tel: (024) 3994 1665
Mobile: 0903 260 612 (Mr. Cường)







Văn phòng chi nhánh tại Đà Nẵng
Số 32, 34 Phạm Phú Tiết, Q. Cẩm Lệ, TP. Đà Nẵng
Mobile: 0931.473.818 - Mr Vương

Đại diện thương mại tại Đắk Lắk
248 Điện Biên Phủ, P. Thành Công, TP. Buôn Ma Thuột, Đắk Lắk
Tel: (0262) 385 9167
Mobile: 091 446 2425 (Mr. Thành)

Đại diện thương mại tại Gia Lai
39 Trần Phú, P. Tây Sơn, Tp. Pleiku,
Tỉnh Gia Lai
Tel: (0269) 371 9818
Mobile: 0914 340 202 (Mr. Lạc)